Mo的引入方式对CeO2脱硝性能的影响

固定源排放的氮氧化物(NOx)导致了严重的环境污染问题,NH3选择性催化还原(NH3-SCR)被认为是目前控制NOx排放的最有效技术,已广泛应用于电力行业的烟气排放治理.然而,我国非电行业的NOx减排仍然面临着重大挑战,因为其排放的废气温度通常低于300oC,且含有一定量的SO2,传统的钒基SCR催化剂因活性温度(300～400oC)较高而无法有效发挥作用.因此,亟待开发新型的高效低温SCR催化剂.铈基催化剂由于氧化铈(CeO2)的优异储氧能力(OSC)和良好的氧化还原能力而显示出较好的低温(80～300oC)脱硝性能,如Mn-Ce,W-Ce,Ta-Ce,Cu-Ce和Nb-Ce等.但这些铈基催化剂易被烟气中的SO2毒化而导致催化活性降低.因此,提高铈基SCR催化剂抗硫中毒能力是其产业化应用的关键.已有研究发现,通过构筑结构保护层或添加另一种金属来保护活性组分是提高SCR催化剂抗硫性能的一种可行策略.氧化钼(MoO3)通常被用做传统V2O5/TiO2催化剂的促进剂以提高其水热稳定性和表面酸性.研究表明,在V/Ti催化剂中引入钼物种不仅可以提高其SCR活性,而且提高了V/Ti催化剂的抗SO2性能,这是由于VMo/Ti表面较少的V–O–V键削弱了对SO2的氧化作用.Tang等开发了一种Fe2O3/MoO3纳米片催化剂,显示出比纯Fe2O3更好的抗SO2能力,主要是由于层状结构的MoO3能阻止NH4+在硫酸氢铵中的沉积.目前关于Mo的引入方式即催化剂的制备方法对铈基催化剂物化性能和NH3-SCR催化性能(特别是抗SO2能力)的影响的研究还比较少.本文分别采用浸渍法和沉淀法在CeO2中引入钼物种,制备了Mo-CeO2和MoCe-cp催化剂来探究制备方法对MoCe催化剂的脱硝性能及抗SO2中毒能力的影响.结果表明,引入Mo可以显著地提高CeO2的低温脱硝性能,其中Mo-CeO2催化剂在150 oC即可达到80％以上的脱硝效率,同时抗SO2中毒性能也得到了显著提高.对催化剂结构、氧化还原能力、表面酸度和反应物分子的吸附脱附性质进行了表征,并与MoCe催化剂脱硝性能和抗硫性能相关联.结果表明,Mo-CeO2和MoCe-cp催化剂的物理化学性质和脱硝性能有明显区别.首先,Mo-CeO2中的钼物种主要存在于CeO2表面,而MoCe-cp中的钼物种主要存在于CeO2体相,其为Mo-CeO2表面带来大量的Br?nsted酸位并抑制了硝酸盐的吸附,促使NH3-SCR反应按照Eley-Rideal机理进行,进而表现出优于MoCe-cp的低温活性.其次,Mo-CeO2表面更多的Mo物种抑制了SO2的吸附,从而使Mo-CeO2表现出更好的抗SO2性能.本文为具有实际应用前景的铈基NH3-SCR催化剂的设计提供了参考.     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

船用气水分离器惯性级流场分析及阻力特性研究

采用二阶全展开ETG有限元与大涡模拟（LES）相结合的算法，对120－20－35－3型船用气水分离器惯性级在不同雷诺数条下的流动进行了模拟，通过其中一组雷诺数条件下计算所得该实验件阻力系数与物理实验所得阻力系数相比较，确定出该雷诺数条件下采用大涡模拟时所需的亚格子应力模型常数，将该常数带入其它各组雷诺数条件下的计算中，并将计算结果与相同条件下的物理实验结果相比较，证实了该常数的通用性。该常数一经确定，对各雷诺数条件下的流场进行分析，结果反映出采用二阶全展开ETG有限元与大涡模拟（LES）相结合的算法可以捕捉到非常丰富的涡系及涡动的时变过程。在流场分析的基础上本文计算了该实验件内的能耗场，计算结果表明实验件内的能耗主要集中在大涡丰富的区段内。     

Shock and traveling wave phenomena on an externally damped, non-linear string

We examine the propagation of shocks and traveling wave phenomena on a one-dimensional string that is executing finite-amplitude, transverse vibrations in a resisting medium. As part of our study, we develop an approach that allows us to describe, albeit approximately, the evolution and propagation of a shock front using analytical methods. In addition, exact traveling wave solutions, one of which involves the Lambert W-function, of the string's equation of motion are determined and analyzed. Lastly, a possible new form of the solution to the linearized problem is presented and extensions and other applications of the present work are briefly discussed.     

Thermoelastoplastic axisymmetric stress-strain state of laminated orthotropic shells

A method is proposed for the numerical analysis of the thermoelastoplastic stress-strain state of laminated shells of revolution, made of isotropic and orthotropic materials, under axisymmetric loading. The method is based on the Kirchhoff-Love hypotheses for a layer stack, the theory of deformation along paths of small curvature for isotropic materials, and Hills theory of flow with isotropic hardening for orthotropic materials. The problem is solved by the method of successive approximations. A numerical example is given.__________Translated from Prikladnaya Mekhanika, Vol. 40, No. 12, pp. 84–91, December 2004.     

Mixed Formulations of Bending Problems for Homogeneous Elastic Plates and Beams

Mixed formulations of bending problems for homogeneous plates (beams) are proposed, whose essence is that the deformation of a plate (beam) near its fixed boundary is described by the threedimensional elasticity equations, and the remaining part by the conventional equations of plate (beam) bending. At the interface between these regions, the solutions of these equations are joined. The mixed formulation allows one to describe the threedimensional stress state in the neighborhood of the fixed boundaries of plates (beams) and take into account the complex nature of the fixing conditions. Finiteelement implementation is more efficient for the mixed formulations of plate (beam) bending problems than for the wellknown threedimensional formulations.     

An experimental study on effects of solid concentration and ζ-potential on pseudoplastic flow of suspensions

The pseudoplastic flow of suspensions, alumina or styrene-acrylamide copolymer particles in water or an aqueous solution of glycerin has been studied by the step-shear-rate method. The relation between the shear rate,D, and the shear stress,, in the step-shear-rate measurements, where the state of dispersion was considered to be constant, was expressed as = AD ^1/2 +CD. The effective solid volume fraction,ø _F, andA were dependent on the shear rate and expressed byø _F =aD ^b andA = D . Combining the above relations, the steady flow curve was expressed by = D ^{1/2 +} + ₀ (1 – a D ^b/0.74)^–1.85 D, where ₀ is the viscosity of the medium.With an increase in solid volume fraction and a decreases in the absolute value of the-potential, the flow behavior of the suspensions changed from Newtonian ( = = b = 0), slightly pseudoplastic ( = b = 0), pseudoplastic ( = 0) to a Bingham-like behavior.The change in viscosity of the medium had an effect on the change in the effective volume fraction.     

结合部切向接触刚度分形模型研究

根据球体与平面接触的切向接触刚度和粗糙表面的接触分形理论，从理论上首次建立了结合部切向接触刚度分形模型，该模型具有尺度独立性。通过对所建模型的数字仿真，直观地给出了结合部切向接触刚度与其影响因素之间的非线性关系，并与实验研究结果具有较好的一致性，从而说明了该模型是合理的。     

Mixing Layer on the Lee Side of an Obstacle

Twolayer miscible flow above an uneven bottom is considered. A mathematical model in the shallowwater approximation is constructed for the development of a turbulent layer between homogeneous layers of different density in a twolayer channel flow over a local obstacle. The influence of the mixing process on the formation of an initial segment of the steadystate densitystratified flow on the leeward side of the obstacle is studied.